Problem 2: 3D analysis of a plate with hole in center

A square plate with a hole at the center is under a tension load p in x direction as shown in the figure below. the dimension of the plate is 10in X 10in, thickness is 0.1in, and radius of hole is 1 in. Assume material structural Steel and p = 100 psi. FInd the maxium stress in plate.

Result:- 

1. Deflection(total )

2. Deflection( x- direction)

3. Deflection( y- direction)

4. Stress(von-Mises)

5. Strain(von-Mises )

6. Stress concentration factor

justify your answer with correct explanation, applying your subject knowledge.

Analysis using workbench

Result

Problem 1: Analysis using ANSYS APDL Script : 3D Analysis of beam with Concentrated Load on Corner

Below there is script of Ansys APDL of 3D analysis of Beam with Concentrated Load on Corner

Firstly copy this script to "Notepad". Go to File Menu, Select "Read Input From". Select file from list.  

/PREP7
ET,1,SOLID186
MP,EX,1,200000000000
MP,PRXY,1,0.3
BLOCK,0,2,0,0.25,0,0.08
ESIZE,0.1
VMESH,1,1
DA,5,UX,0
DA,5,UY,0
DA,5,UZ,0
FK,7,FZ,-1000
/SOLU
SOLVE
/POST1
PLNSOL,U,SUM,1